Hybrid scissor lift rental from Luibl Rental

A hybrid scissor lift solves a problem that comes up again and again in day-to-day projects: the machine has to cross unpaved ground to reach its work location and then operate inside a closed hall where exhaust fumes and noise are not permitted. Anyone who rents two machines for this pays for two transports and two rental items. The Luibl rental fleet includes four scissor lifts with switchable drive – working heights from 11.75 m to 27.20 m, load capacities from 363 kg to 1,000 kg. All machines are inspected before handover in line with applicable Dutch health and safety rules and NEN-EN 280.

Two drive concepts lie behind the term:

• Bi-Energy: A diesel generator charges the battery and handles travel on rough ground; for lifting and driving indoors, the machine switches to pure battery operation. The diesel engine stays off.

• Hybrid: Diesel and electric drive are permanently combined; the control system selects the operating mode depending on load or by operator preselection. Typical of the heavy rough-terrain scissor lifts with four-wheel drive.

In practice, both mean the same thing: one machine, two working environments, one transport.

The heavy-duty class: 27 m working height with 1,000 kg

The Holland Lift M250HYL25 Combistar 4WD is the only machine in the rental fleet that combines 27.20 m working height, 1,000 kg platform load capacity and four-wheel drive with a switchable drive concept. The platform can be extended to 8.25 m – the basic requirement when facade elements, ventilation ducts or sandwich panels are to be worked on in one lift without repositioning the machine. Typical applications: facade installation on multi-storey logistics halls, steel construction in plant engineering, roof work followed by interior fit-out.

The mid-range class: 12 m to 15 m for alternating use

The three Bi-Energy machines cover the range in which most alternating-use projects fall – commercial construction, hall refurbishment, ventilation and sprinkler installation on sites that do not yet have a reliable mains connection.

• PB S151-19EGI 4x4 – 15.00 m working height, 500 kg load capacity, platform extendable to 6.36 m, four-wheel drive. The strongest of the three when material has to go up on the platform.

• Genie GS 4069DC – 14.12 m working height, 363 kg load capacity, compact base dimensions of 2.79 m × 1.60 m. Fits through site gates that are too narrow for the larger rough-terrain scissor lifts.

• Genie GS 3369BE – 11.75 m working height, 454 kg load capacity, identical base dimensions to the GS 4069DC with a higher load capacity. The choice for two-person installation work with tools.

The switching capability costs a rental surcharge compared with a pure electric scissor lift of the same working height. It pays off as soon as one of these four points applies:

1. No reliable mains connection at the work location. On shell construction sites, the site power is usually already allocated. Anyone using an electric scissor lift without guaranteed overnight charging loses working time on the second day. The diesel generator charges independently of the grid.

2. The machine has to cross rough ground to reach its position. Topsoil, gravel, site access roads with gradients: electric scissor lifts with non-marking tyres are not designed for this. The hybrid machines in the fleet have four-wheel drive.

3. Indoor and outdoor use alternate during the project. Facade first, interior fit-out afterwards – classic in commercial and logistics construction. A change of machine means two transports, two briefings and a gap in the construction schedule.

4. Indoor emission requirements. In food production facilities, clean rooms and operating logistics facilities, diesel operation is ruled out. Pure battery operation meets the requirements for working without local emissions, without losing the rough-terrain capability needed to get there.

If none of these points applies, the pure electric scissor lift or the diesel scissor lift is the more economical choice.

Switching when stationary, not under load. The operating mode is changed with the machine stationary via the ground controls or – depending on the model – via the platform controls. Switching during lifting is not provided for by design. For work planning, this means the operating mode is selected before setting up, not during work.

Battery capacity determines indoor operating time. In pure electric mode, the operating time is limited by the battery. As a planning value, one working day applies with a full charge and a normal lifting/driving profile. For multi-shift operation indoors, either a charging break must be planned or the generator must be used for recharging outside the emission-sensitive area.

Check the choice of tyres. Rough-terrain capability and non-marking properties are two separate requirements. If the machine continues working on a coated hall floor after outdoor use, the tyres must be clarified explicitly in the enquiry – please state this in your request.

Weight and wheel load. Switchable machines carry both a generator and a battery pack. The total weight is higher than that of a pure electric scissor lift of the same working height. For use on floors in underground car parks or upper storeys, the wheel load of the specific model is decisive, not the total weight – we provide the data sheets before the rental.

Outriggers and ground slope. The rough-terrain models level via hydraulic outriggers. The permissible ground slope during operation is model-specific and documented in the data sheet; the tilt sensor shuts off the lifting function if it is exceeded.

Every scissor lift from the Luibl rental fleet undergoes periodic inspection of work equipment under the Working Conditions Decree and is checked by our workshop staff before every delivery. Standard equipment includes a tilt alarm, overload protection, a mechanical emergency lowering system and emergency lowering from the ground on both sides. For operation, the following still applies: the operator must be instructed in line with applicable Dutch health and safety rules, and personal fall protection equipment is mandatory on the platform. The operator receives a briefing on handover; IPAF remains the recognised industry standard. With switchable operation, two points are added: * The briefing must cover both operating modes – in practice, operating errors occur mainly when switching. * If the diesel generator is operated in enclosed spaces, the ventilation requirements under applicable Dutch health and safety rules apply. This is exactly what electric operation is meant to avoid; the operator's work instructions should regulate this clearly. Transport is carried out with our own low-loader fleet, delivery throughout the Netherlands and to all other Luibl markets: Germany, Austria, Switzerland, Poland, the Czech Republic, Italy, Hungary, Luxembourg. For long-term rentals, we offer combined packages with periodic inspection and annual maintenance during the rental period.

Do you know which working height and which operating mode you need? Send us the working height, load capacity, work location, rental period and – if relevant – the required tyres. We will get back to you at short notice with a quote and availability.

Request a quote now → luibl.eu/kontakt/ · 00800 2000 3000 (toll-free)