
Manitou rental: telehandlers, forklifts and aerial work platforms from one rental fleet
At Luibl Rental you rent Manitou machines for almost every lifting task on site: fixed, rotating and heavy-duty telehandlers, an electric telehandler, forklifts and rough-terrain forklifts, and aerial work platforms. The telehandlers range from 4.30 to 34.70 m lift height and from 1,250 to 33,000 kg load capacity.
Which machine fits is decided by three questions: how high and how far does the load have to go, how heavy is it at that point, and how much space does the site offer? This page sorts the Manitou series by exactly these criteria and takes you to the right model overview.
Four types of telehandler: which Manitou series fits your job
Manitou builds its telehandlers in clearly separated series. For your choice, what counts is lift height, the load at the placement point and the working environment.
- Fixed Telehandlers (ULM and MT): the boom only lifts forwards. In the rental fleet from 4.30 m lift height and 1,250 kg load capacity (ULM 412) up to 17.55 m and 4,000 kg (MT 1840). The choice for material handling, pallets and loading floors. → Manitou fixed telehandlers
- Rotating Telehandlers (MRT): the superstructure rotates through 360 degrees while the chassis stays put on its outriggers. Ten models from 17.90 to 34.70 m lift height and 4,000 to 7,000 kg load capacity. The choice for many load points in a confined space and for crane and basket work. → Manitou Roto rental
- Heavy-Duty Telehandlers (MHT): five models from 12,000 kg (MHT 10120) to 33,000 kg load capacity (MHT 12330) at 9.60 to 11.92 m lift height. For steel construction, precast elements and industrial installation. → Heavy-Duty Telehandlers
- Electric telehandlers: the Manitou MT 625e lifts 2,500 kg to 5.85 m and works without local exhaust emissions, for example in halls and city centres. → Electric telehandlers
The load chart decides, not the rated load capacity
The load capacity in the data sheet only applies with the boom retracted close to the machine. The further the boom extends, the more the permissible load drops. Plan with the load at the furthest placement point.
Clarify three points before your enquiry:
- Load and position: the actual weight and the height and outreach at which it is placed. Only this combination determines the model according to the load chart.
- Ground conditions: load-bearing, level or sloping? Tyres, outriggers and load-spreading pads depend on this.
- Access: gates, passages and bends limit the machine size. The Manitou telehandlers in the rental fleet are 1.49 m (ULM 412) to 2.98 m (MHT 12330) wide.
Manitou forklifts and aerial work platforms complement the telehandlers
Not every task needs a telehandler. For pure material handling on firm ground and for work at height without a load, there are better-suited Manitou machines.
- Forklifts: diesel forklifts of the MI series with 3,500 to 10,000 kg load capacity and 4.50 to 6.00 m lift height for yards, warehouses and truck loading. → Forklift rental
- Rough-terrain forklifts: Manitou M30-4 and M50-4 with 3,000 and 5,000 kg load capacity and 4.75 m lift height for unpaved ground.
- Aerial work platforms: mast lifts, articulating boom lifts and telescopic boom lifts from 9.85 m (VJR 100) to 27.73 m working height (280 TJ), electric or diesel. → Aerial work platform rental
With attachments the telehandler becomes a crane or an aerial work platform
A Manitou telehandler changes its task via the attachment. Each attachment has its own load chart, which the operator must know before use.
- Forks: lift pallets and building materials onto floor slabs, scaffolding and roofs or unload trucks.
- Load hook and winch: the telehandler works as a mobile crane and places loads over obstacles.
- Platform: with a basket approved for the model it becomes an aerial work platform, especially the rotating MRT models.
- Bucket: for bulk material in landscaping, green space and earthworks.
The overview Attachments for telehandlers shows which attachments fit your model.
Every Manitou machine needs a competent operator
For telehandlers, forklifts and aerial work platforms, the employer in the Netherlands must ensure under Dutch occupational health and safety legislation (Working Conditions Act and Working Conditions Decree) that the operator has demonstrable competence. The employer also instructs the operator on the specific machine and appoints them as operator.
- Telehandlers: demonstrable competence for the telehandler. Rotating machines as well as basket and crane work each require additional competence.
- Forklifts and rough-terrain forklifts: demonstrable competence of the forklift operator, to be ensured by the employer.
- Aerial work platforms: operator instruction on the specific platform, in line with applicable Dutch health and safety rules.
- Basket: in the basket, personal fall protection is mandatory, in line with the rules on work at height under the Working Conditions Decree.
Luibl Rental does not provide training itself, but informs you about certified providers. Find out more on the Trainings page.
FAQ: Manitou rental machines

Which Manitou machines can I rent from Luibl Rental?
What is the difference between Manitou MT, MRT and MHT?
How high does the largest Manitou telehandler in the rental fleet lift?
What qualification does the operator of a Manitou telehandler need?
Can a Manitou telehandler be used as an aerial work platform?
How does a Manitou rental machine get to the site?
Manitou rental: with these details we prepare your quote
The more precise your enquiry, the better our model proposal will fit:
- site location and rental period
- machine type or task, for example lifting material, craning or working at height
- required lift height and the heaviest load with its distance from the machine
- attachments, access and ground conditions at the set-up position
We deliver to your site, throughout the Netherlands. You will receive a quote with model, transport and attachments at short notice. Request Manitou now.




