TSH-16010 | Manitou MHT 10160
Manitou MHT 10160 Hire – High Capacity for Heavy Loads
Not every lifting task can be solved with standard equipment. When wind turbine components need positioning, steel components need handling in port areas or heavy machinery needs moving on tight industrial sites, the choice of equipment defines project success. The Manitou MHT 10160 is designed for exactly these tasks: 16,000 kg rated capacity, 173 hp engine output, hydrostatic transmission and four-wheel drive with three steering modes. Luibl Rental delivers this 16-tonne machine with its own low-loader fleet throughout Europe – including professional familiarisation by qualified specialists on site.
Powerhouse for Industry and Construction: The Manitou MHT 10160 at a Glance
The MHT 10160 belongs to the heavy-duty class of Manitou construction telehandlers. With a capacity of 16 tonnes and a maximum lift height of 9.6 metres, it moves heavy and bulky loads on any terrain thanks to its four driven and steered wheels. The machine weight is approx. 21,500 kg – a factor that must be taken into account when assessing ground bearing capacity at the work site. On request, Luibl Rental checks together with the customer whether the planned work site meets the structural requirements and advises on the selection of suitable outrigger pads or load distribution mats.
The 17.5 R25 tyres provide sufficient contact area even on unpaved ground. At the full forward reach of 5.2 m, 4,500 kg are still available – a value that forms the basis for planning transfer and installation operations in this equipment class.
Technical Precision: Millimetre Work with a 16,000 kg Load
The key control system for precision work at full load is the JSM, a multifunction joystick that combines all essential working and travel commands in one hand. When positioning heavy loads, for example when placing generator components or steel girders onto narrow bearing points, one-handed operation considerably reduces the coordination effort. The operator keeps a full overview of load behaviour without having to look away for secondary inputs.
The load-sensing pump with 180 l/min at 270 bar supplies hydraulic pressure on demand rather than continuously. This means that during slow precision movements the system works with a lower flow rate, which increases control sensitivity and reduces heat build-up in the hydraulic system. The integrated load moment limiter monitors the lifting moment in real time and prevents the permissible load limit from being exceeded.
The colour touchscreen in the panoramic cab displays load weight, machine position and attachment identification. Attachment recognition allows the load chart to be adjusted automatically as soon as a new attachment is connected – without manual intervention in the control parameters.
Off-Road Capability and Stability in Every Position
The MHT 10160 has three steering modes: front-wheel steering, four-wheel steering and crab steering. The combination of four-wheel drive and three selectable steering modes allows the machine to be manoeuvred reliably even on confined industrial sites, in ports with limited manoeuvring space or on wet construction sites. Crab steering allows the machine to travel sideways – particularly relevant when working along long installation fronts or on narrow site roads.
Frame levelling compensates for uneven ground laterally without the machine having to be repositioned. For stationary installation operations – such as placing machine parts on a foundation – this is a direct time advantage over machines without levelling. The service brake, a hydraulically assisted multi-disc brake on the front and rear axles, ensures controlled braking at full load even on slopes. Gradeability under load is 48 % – sufficient for use on ramps and in hilly terrain.
Typical Applications of the 16 t Heavy-Duty Telehandler
Heavy steel construction and plant installation: steel girders, bridge elements and boiler components with individual weights of up to 16 t can be lifted into installation position with the MHT 10160. The hydrostatic drive provides the fine control required for precise placement within tight tolerances.
Wind energy logistics: gearbox housings, generators and hubs of modern wind turbines regularly exceed the 10-tonne mark. The MHT 10160 covers this load range with sufficient lift height reserve and can be combined with a crane hook mount and winch – for cases where the load cannot be picked up directly with forks.
Port handling and heavy haulage logistics: in port areas, ground pressure and subsoil bearing capacity are critical parameters. The low tyre profile of the 17.5 R25 tyres distributes the machine weight over a large area. Combined with load distribution plates, use on quay walls and paved port areas can be planned.
Mining and waste management: heavy units, pumping stations and container batteries in mining require machines that work reliably in adverse weather conditions and on unpaved ground. The 173 hp engine operates with exhaust aftertreatment.
FAQ: Frequently Asked Questions about the Manitou MHT 10160
How much does a Manitou MHT 10160 weigh?
The machine weight is approx. 21,500 kg. This figure is essential for assessing the ground bearing capacity at the work site – especially on concrete slabs, basements or temporary access roads. Luibl Rental provides the complete Manitou data sheet with exact axle loads at handover.
Can the MHT 10160 be hired with a winch?
The MHT 10160 can be combined with a wide range of attachments: fork tines, positioner, hook and winch, bucket, man basket and tyre handler. Luibl Rental advises on the selection of the right attachment for the specific application and clarifies availability for the desired hire date.
How much does it cost to hire the Manitou MHT 10160?
The hire price depends on hire duration, work site, delivery distance and attachment equipment. Long-term projects are calculated with tiered conditions and include maintenance intervals where required. Luibl Rental prepares an individual quotation on request without flat-rate charges.
Hire the Manitou MHT 10160 from Luibl Rental Now
Every machine in the Luibl Rental hire fleet is serviced and fully inspected before delivery. The original Manitou data sheet including load chart is enclosed. On request, a technician is available for familiarisation, attachment changes or technical support throughout the entire hire period. Thanks to its own low-loader fleet, Luibl Rental also delivers the MHT 10160 to hard-to-reach work sites. We organise delivery and transport by arrangement.
Request availability and hire conditions now – quotation promptly.
Send enquiry
Key Technical Data
- Lift height: 9.6 m
- Capacity: 16,000 kg
- Horizontal outreach: 5.2 m
- Width: 2.48 m
- Height: 2.99 m
